Starting the bridge; part 2

Hi all,

Well, the bridge is already on its way. Here some pictures.

Parts:

Base:

Base with turn plate:

Bearing of Delrin:

Instead of 2 parts it will get 1 (because it will be 1-track):

The parts that will build the connecting pieces between the bridge side halves:

Sorting out the side halves:

First halve. 2 pieces make 1 halve bridge side piece:

2 connected to the middle piece:

One side ready, one to go:

Connecting top rods:

And mounted:

Both sides ready:

Now work starts with the bridge floor. It has to be made smaller from 2-track to one track. So the cross pieces has to be shortened with a saw:

Using 2 restpieces to line up the new shortened piece:

2 modified with one original:

Set of 5 for one halve floor:

The Trumpeter saw I use for this modification:

Mounting the new pieces:

To one half floor:

 Almost ready:

And both pieces ready to mount:

The mounting piece:

Glued to one halve:

And the second piece, ready to be glued to the first:

And the mockup looks like this. I am satisfied!:

The end piers:

And a module mockup with the bridge:

Right side with the short bridge:

Middle where one of two Central valley bridges will come:

Left where the second Central Valley bridge will be:

Overview with closed and opened bridge:

And the idea drawn in:

More to come!